Brand:
DEXTER AXLE
Weight:
32.00 LBS
Mfr Part Number:
180455
Bulldog Sidewind Drop Leg Square Jack w/ Footplate - 15" Lift - 10,000lb Capacity
Bulldog 10,000 lb. support capacity square jacks "fills the gap" between 8,000 lb. and 12,000 lb. square jack product offerings. If the existing 8,000 lb. support capacity square jacks are too small or the 12,000 lb. support capacity square jacks are too big, look no further - your application and pricing requirements have been met! This is the highest quality and best performing jack available in the marketplace today, a total balance between capacity, speed, and effort.
Heavy-gauge 3" square tubing allows for direct weld mounting wherever the application allows - no burn through
Use the painted outer tube as the final finish or primer
Zinc-plated inner tube and drop leg
Heavy-duty, with reinforcement ribs, zero water retention
Precision manufactured for long term reliability and smooth, easy cranking
Grease zerk for easy lubrication as needed
Oil-impregnated bushing for improved bearing and gear life
Direct weld to outer tube is standard
Sidewind models - 1:1.86 gear ratio
- Sidewind
- 15" Lift
- 3" Tubing width
- 12" Handle radius
- 7,200lb Lifting capacity
- 10,000lb Static capacity
- Limited 5-year warranty
(A) Retracted=25.67"
(B) Extended=54.17"
(C) Dropleg=13.5"
Bulldog Sidewind Drop Leg Square Jack w/ Footplate - 15" Lift - 10,000lb Capacity
Bulldog 10,000 lb. support capacity square jacks "fills the gap" between 8,000 lb. and 12,000 lb. square jack product offerings. If the existing 8,000 lb. support capacity square jacks are too small or the 12,000 lb. support capacity square jacks are too big, look no further - your application and pricing requirements have been met! This is the highest quality and best performing jack available in the marketplace today, a total balance between capacity, speed, and effort.
Heavy-gauge 3" square tubing allows for direct weld mounting wherever the application allows - no burn through
Use the painted outer tube as the final finish or primer
Zinc-plated inner tube and drop leg
Heavy-duty, with reinforcement ribs, zero water retention
Precision manufactured for long term reliability and smooth, easy cranking
Grease zerk for easy lubrication as needed
Oil-impregnated bushing for improved bearing and gear life
Direct weld to outer tube is standard
Sidewind models - 1:1.86 gear ratio
- Sidewind
- 15" Lift
- 3" Tubing width
- 12" Handle radius
- 7,200lb Lifting capacity
- 10,000lb Static capacity
- Limited 5-year warranty
(A) Retracted=25.67"
(B) Extended=54.17"
(C) Dropleg=13.5"
Not Available
2150 Sadler Drive Southwest
Cedar Rapids, Iowa 52404
Not Available
3151 Research Parkway
Davenport, Iowa 52806
Not Available
3289 Airport Boulevard
Waterloo, Iowa 50703
Not Available
425 East 14th Street
Dubuque, Iowa 52001