Right Weigh 202-DDG-02RKC Interior Digital Axle Load Scale Kit - Kit For Dedicated Tractor/Trailer Set including Gauge and Air line Install Kits
Right Weigh's 202-DDG-02RKC Interior Digital load scale kit has two internal air sensors and is designed for monitoring two height control valves (HCV's). This can be either a dual HCV tractor, or a single HCV tractor with a single HCV trailer. On the display, you can setup an Estimated Steer Axle, Drive, and Trailer A, depending on your configuration - as long as your truck and trailer consists of a total of 2 height control valves. After both an empty and loaded calibration has been performed at a certified ground scale for all axle groups attached, the gauge will reliably display the on-the-ground axle group weight in pounds or kilograms. When properly calibrated and used, Right Weigh's on-board load scales are the most valuable tools available for maintaining safe and legal axle weights. Corresponding air line installation kits Included Touchscreen LCD display On-the-ground axle group weight is displayed in pounds or kilograms Utilizes a simple two-point (empty & loaded) calibration process which makes it more accurate than a standard analog gauge Can calculate an estimated steer axle weight from drive axle suspension data Programmable 6-digit PIN code can be activated to prevent calibration tampering Includes air line installation kits
