null

Eaton 19659-010 - ELocker Differential, 30 Spline, 2.73 & Up Ratio for GM 8.5/8.625 In. 10 Bolt Front/Rear

No reviews yet Write a Review
SKU:
EDT19659-010

Description:

Eaton ELocker electronically controlled locking differential for the GM 8.5/8.6 in. axle with 30-spline gears, ratios of 2.73 and higher. All Eaton differentials for GM 8.5 in. and 8.6 in. axles require special bearings: axles with small bearing bores (2.89 in. race O.D.), typically pre-1999, need bearing LM102949 and race LM102911; axles with large bearing bores (3.06 in. race O.D.), typically 1999-2013, need bearing LM603049 and race LM603012.



Eaton Performance brochure

Eaton Performance brochure
Eaton Performance differential application guide

Eaton Performance differential application guide
Eaton ELocker service kits

Eaton ELocker service kits
Differential Limited Warranty and Limitations Statement

Differential Limited Warranty and Limitations Statement
Eaton ELocker Wiring harness labeled

Eaton ELocker Wiring harness labeled
Eaton ELocker wiring schematic

Eaton ELocker wiring schematic
Eaton 19659-010 - ELocker Differential, 30 Spline, 2.73 & Up Ratio for GM 8.5/8.625 In. 10 Bolt Front/Rear

Description:

Eaton ELocker electronically controlled locking differential for the GM 8.5/8.6 in. axle with 30-spline gears, ratios of 2.73 and higher. All Eaton differentials for GM 8.5 in. and 8.6 in. axles require special bearings: axles with small bearing bores (2.89 in. race O.D.), typically pre-1999, need bearing LM102949 and race LM102911; axles with large bearing bores (3.06 in. race O.D.), typically 1999-2013, need bearing LM603049 and race LM603012.



Eaton Performance brochure

Eaton Performance brochure
Eaton Performance differential application guide

Eaton Performance differential application guide
Eaton ELocker service kits

Eaton ELocker service kits
Differential Limited Warranty and Limitations Statement

Differential Limited Warranty and Limitations Statement
Eaton ELocker Wiring harness labeled

Eaton ELocker Wiring harness labeled
Eaton ELocker wiring schematic

Eaton ELocker wiring schematic
$1,698.98
Brand:
EATON PERFORMANCE
Weight:
25.41 LBS
Mfr Part Number:
19659-010
Product Type:
Differential
Ring gear ratio:
2.73 & up
Gear spline tooth count:
30 EA
Axle shaft diameter:
1.32 in
Ring gear size:
8.5 in
Differential type:
Locking
Vehicle usage:
Off-Road: Work Truck / Towing | Off-Road: Light Trail / Sand Sports | Off-Road: Extreme Off-Road | Off-Road: Rock Crawl | On Road: Work Truck / Towing
Catalog Notes:
All Eaton differentials made for General Motors 8.5" and 8.6" axles require special bearings. For axles with small bearing bores (race O.D. or 2.89"), usually found on vehicles prior to 1999, bearing LM102949 and race LM102911 are required. For axles