Brand:
DEXTER AXLE
Weight:
0.01 LBS
Mfr Part Number:
8-213-5UC1
Dexter Hub Kit W/ 6 on 5.5" Bolt Pattern For 5,200lb Axles
Dexter hub kits come with some of your main components like the inner and outer bearings. There is no need to worry about the races as they are already pressed into the hub for you. You will also get the grease seal, grease cap, and wheel nuts for the hub. This hub is designed for use with a #42 spindle. Each hub has a capacity of 2,600lbs. Spindle nut and spindle washer sold separately.
Items in Kit:
- 1 25580 Inner Bearing (1.75" ID)
- 1 LM67048 Outer Bearing (1.25" ID)
- 1 25520 Inner Race (Already Pressed In) 3.265"
- 1 LM67010 Outer Race (Already Pressed In) 2.328"
- 1 10-36 Grease Seal (2.25" x 3.376")
- 1 45896 Grease Cap (2.44")
- 6 X1023R Coned Wheel Nuts
- 1 6 on 5.5" Hub
- 2,600lb Capacity Per Hub
To determine the bolt circle on hubs or wheels with an even number of studs, measure center-to-center of studs directly across from each other on the diameter(bolt patterns are always measured in inches). Example: 8 on 6 1/2 would mean 8 studs with 6 1/2" center-to-center diameter.
Dexter Hub Kit W/ 6 on 5.5" Bolt Pattern For 5,200lb Axles
Dexter hub kits come with some of your main components like the inner and outer bearings. There is no need to worry about the races as they are already pressed into the hub for you. You will also get the grease seal, grease cap, and wheel nuts for the hub. This hub is designed for use with a #42 spindle. Each hub has a capacity of 2,600lbs. Spindle nut and spindle washer sold separately.
Items in Kit:
- 1 25580 Inner Bearing (1.75" ID)
- 1 LM67048 Outer Bearing (1.25" ID)
- 1 25520 Inner Race (Already Pressed In) 3.265"
- 1 LM67010 Outer Race (Already Pressed In) 2.328"
- 1 10-36 Grease Seal (2.25" x 3.376")
- 1 45896 Grease Cap (2.44")
- 6 X1023R Coned Wheel Nuts
- 1 6 on 5.5" Hub
- 2,600lb Capacity Per Hub
To determine the bolt circle on hubs or wheels with an even number of studs, measure center-to-center of studs directly across from each other on the diameter(bolt patterns are always measured in inches). Example: 8 on 6 1/2 would mean 8 studs with 6 1/2" center-to-center diameter.
