Brand:
DEXTER AXLE
Weight:
0.01 LBS
Mfr Part Number:
8-174-5UC3
Dexter 12" x 2" 5-Spoke UTG Hub & Drum For 6-7k Axles
Dexter hub & drum kits come with some of your main components like the inner and outer bearings. There is no need to worry about the races as they are already pressed into the hub for you. You will also get the grease seal, grease cap, rim clamps, and nuts for the hub. This hub & drum is designed for use with a #42 spindle. Each hub & drum has a capacity of 3,500lbs. Spindle nut and spindle washer sold separately.
Items in Kit:
- 1 25580 Inner Bearing (1.75" ID)
- 1 15123 Outer Bearing (1.25" ID)
- 1 25520 Outer Race (Already Pressed In) 3.265"
- 1 15245 Inner Race (Already Pressed In) 2.441
- 1 10-36 Grease Seal (2.25" x 3.376")
- 1 45896 Grease Cap (2.44" OD)
- 5 15-2 Rim Clamps
- 5 916N Nuts
- 1 5-Spoke Hub & Drum
- 3,500lb Capacity Per Hub
- Use with a 12" x 2" brake
To determine the bolt circle on hubs or wheels with an odd number of bolt holes, measure from outside to center of the studs across the pattern(bolt patterns are always measured in inches). Example: If you were to number the studs 1, 2, 3, then you would measure from the outside of stud 1 to the center of stud 3.
Dexter 12" x 2" 5-Spoke UTG Hub & Drum For 6-7k Axles
Dexter hub & drum kits come with some of your main components like the inner and outer bearings. There is no need to worry about the races as they are already pressed into the hub for you. You will also get the grease seal, grease cap, rim clamps, and nuts for the hub. This hub & drum is designed for use with a #42 spindle. Each hub & drum has a capacity of 3,500lbs. Spindle nut and spindle washer sold separately.
Items in Kit:
- 1 25580 Inner Bearing (1.75" ID)
- 1 15123 Outer Bearing (1.25" ID)
- 1 25520 Outer Race (Already Pressed In) 3.265"
- 1 15245 Inner Race (Already Pressed In) 2.441
- 1 10-36 Grease Seal (2.25" x 3.376")
- 1 45896 Grease Cap (2.44" OD)
- 5 15-2 Rim Clamps
- 5 916N Nuts
- 1 5-Spoke Hub & Drum
- 3,500lb Capacity Per Hub
- Use with a 12" x 2" brake
To determine the bolt circle on hubs or wheels with an odd number of bolt holes, measure from outside to center of the studs across the pattern(bolt patterns are always measured in inches). Example: If you were to number the studs 1, 2, 3, then you would measure from the outside of stud 1 to the center of stud 3.
