Brand:
BENDIX
Weight:
23.99 LBS
Mfr Part Number:
K160647SC
Mounting:
Purge Reservoir - 3/8-16 UNC-2B (4x)
Supply Port:
1/2-14 NPT
Minimum Operating Temperature:
-40 °F (-40 °C)
Air Dryer Type:
Stand-Alone
Purge Exhaust Port:
Standard
Purge Valve Type:
Hard Seat
Purge Volume:
Standard
Safety Valve Opening Pressure:
153 PSI
Heater / Thermostat Rating:
12V / 90W
Heater Connector Type:
Metri-Pack 280 Series 2-Way Sealed Connector (Male)
Heater Connector Color:
White
Cartridge Type:
PuraGuard (Coalescing)
Cartridge Thread:
M41 x 1.5-6H RH
Clearance to Remove Cartridge:
1.00 IN
Governor Included:
Yes
Maximum Inlet Temperature:
160 °F (71 °C)
Cautionary Note(s):
Non-serviceable clamp band. Do not remove.
Cut-in Pressure:
110 PSI
Cut-out Pressure:
130 PSI
Governor Unloader Port:
1/8-27 NPT (Plugged)
Governor Reservoir Port:
1/8-27 NPT (Plugged)
PRI Delivery Port 21:
1/4-18 NPT
PRI Delivery Opening Pressure:
103 PSI
SEC Delivery Port 22:
1/4-18 NPT
AUX 1 Delivery Port 1:
1/4-18 NPT
AUX 1 Delivery Port 2:
1/4-18 NPT
AUX 1 Delivery Port 3:
1/4-18 NPT
AUX 1 Delivery Port 4:
1/4-18 NPT
AUX 1 Delivery Opening Pressure:
112 PSI
AUX 2 Delivery Port:
1/4-18 NPT
AUX 2 Delivery Opening Pressure:
112 PSI
Governor Type:
Non-Adjustable
Pressure Protection Valve Configuration:
4 in Parallel
SEC Delivery Opening Pressure:
112 PSI
Remote Charge / Fill Port (through Desiccant):
1/4-18 NPT
Compressor Unloader Port:
1/4-18 NPT
Remote Charge / Fill Port 1 (after Desiccant):
1/4-18 NPT
Remote Charge / Fill Port 2 (after Desiccant):
1/4-18 NPT (with Safety Valve)
Reservoir Diameter:
Ø 10.2 IN
Reservoir Length:
4.35 IN
Reservoir Material:
Aluminum
Number of Compartments:
1
Reservoir Fill Type:
Integral Fill
