null

BF1384-SP FUEL/WATER SEPARATOR SPIN-ON

BALDWIN FILTERS

No reviews yet Write a Review
SKU:
BALBF1384-SP

Description:

Baldwin - Spin-on Fuel Filters

Modern fuel injection systems require fuel be free of both particulate and water contamination. Baldwin spin-on fuel filters with heavy-duty construction keep fuel clean and engines running at maximum efficiency.
New fuel systems operate at higher pressures (up to 60,000 psi) and tighter tolerances than ever before. Microscopic particles in the fuel, as small as 2-3 microns, can cause abrasive wear severely damaging the fuel injection system and other high pressure engine components. Baldwin Filters offers more than 1100 different fuel filters, fuel managers, coalescers, and fuel/water separators to protect your engine.
BF1384-SP FUEL/WATER SEPARATOR SPIN-ON

Description:

Baldwin - Spin-on Fuel Filters

Modern fuel injection systems require fuel be free of both particulate and water contamination. Baldwin spin-on fuel filters with heavy-duty construction keep fuel clean and engines running at maximum efficiency.
New fuel systems operate at higher pressures (up to 60,000 psi) and tighter tolerances than ever before. Microscopic particles in the fuel, as small as 2-3 microns, can cause abrasive wear severely damaging the fuel injection system and other high pressure engine components. Baldwin Filters offers more than 1100 different fuel filters, fuel managers, coalescers, and fuel/water separators to protect your engine.
$27.56
Brand:
BALDWIN FILTERS
Weight:
1.71 LBS
Mfr Part Number:
BF1384-SP
Description:
Fuel/Water Separator Spin-on with Drain and Sensor Port
Contains:
Sensor Port Thread: 1/2-20
Fits:
Mack Trucks with MP7, MP8 Engines
Furnished Gasket:
[1] Included
Integral Gasket:
[1] Included
O-Ring:
[1] Included
Per Inch:
14
Related to:
{BF1366-O} (Open Port Version) | {BF1252} (Standard Version)
Replaces:
Mack 20539578
Thread:
1
Height:
7 13/16
Height (mm):
198.4
Outside Diameter 1:
3 11/16
Outside Diameter 1 (mm):
93.7
Notes:
CAUTION: Furnished D-Ring must be installed on post for seal.