Brand:
BENDIX
Weight:
15.50 LBS
Mfr Part Number:
K049199
Mounting:
Mount to Purge Reservoir (Not Included)
Supply Port:
1/2-14 NPT
Minimum Operating Temperature:
-40 °F (-40 °C)
Air Dryer Type:
Stand-Alone
Purge Exhaust Port:
Standard
Purge Valve Type:
Hard Seat
Safety Valve Opening Pressure:
153 PSI
Heater / Thermostat Rating:
12V / 90W
Heater Connector Type:
Metri-Pack 280 Series 2-Way Sealed Connector (Male)
Heater Connector Color:
White
Cartridge Type:
Standard
Cartridge Thread:
M39 x 1.5-6H RH
Clearance to Remove Cartridge:
1.00 IN
Governor Included:
Yes
Maximum Inlet Temperature:
160 °F (71 °C)
Cautionary Note(s):
Pressure protection valve configs are not interchangeable.
Cut-in Pressure:
110 PSI
Cut-out Pressure:
130 PSI
Governor Unloader Port:
1/8-27 NPT
Governor Reservoir Port:
1/8-27 NPT (Plugged)
PRI Delivery Port 21:
1/4-18 NPT
PRI Delivery Opening Pressure:
103 PSI
SEC Delivery Port 22:
1/4-18 NPT
AUX 1 Delivery Port 1:
1/4-18 NPT
AUX 1 Delivery Port 2:
1/4-18 NPT
AUX 1 Delivery Port 3:
1/4-18 NPT
AUX 1 Delivery Port 4:
1/4-18 NPT
AUX 1 Delivery Opening Pressure:
112 PSI
AUX 2 Delivery Port:
1/4-18 NPT
AUX 2 Delivery Opening Pressure:
112 PSI
Governor Type:
Non-Adjustable
Pressure Protection Valve Configuration:
4 in Parallel
SEC Delivery Opening Pressure:
112 PSI
