Brand:
DEXTER AXLE
Weight:
0.01 LBS
Mfr Part Number:
8-257-5UC3
Dexter 7" x 1-1/4" Hub & Drum Kit For 2-2.2K axles
There is no need to worry about the races as they are already pressed into the hub & drum for you. This hub & drum designed for use with a BTR spindle, and can be used with a BT8 spindle using L44643 bearings(sold separately). Each hub has a capacity of 1,000lbs using the L44643 bearings and 1,100lbs using theL44649 bearings. The spindle nut and spindle washer sold separately.
- 5 on 4.5" Bolt pattern Hub & Drum
- 2 L44610 Outer Race (Already Pressed In) 1.98" OD
- 2 L44649 Bearings (1.063" ID)
- 1 10-60 Grease seal (1.5" x 1.987")
- 46749 Grease cap (1.986" OD)
- 5 X1023R Wheel nuts
- Use with a 7" x 1-1/4" brake
To determine the bolt circle on hubs or wheels with an odd number of bolt holes, measure from outside to center of the studs across the pattern(bolt patterns are always measured in inches). Example: If you were to number the studs 1, 2, 3, then you would measure from the outside of stud 1 to the center of stud 3.
Dexter 7" x 1-1/4" Hub & Drum Kit For 2-2.2K axles
There is no need to worry about the races as they are already pressed into the hub & drum for you. This hub & drum designed for use with a BTR spindle, and can be used with a BT8 spindle using L44643 bearings(sold separately). Each hub has a capacity of 1,000lbs using the L44643 bearings and 1,100lbs using theL44649 bearings. The spindle nut and spindle washer sold separately.
- 5 on 4.5" Bolt pattern Hub & Drum
- 2 L44610 Outer Race (Already Pressed In) 1.98" OD
- 2 L44649 Bearings (1.063" ID)
- 1 10-60 Grease seal (1.5" x 1.987")
- 46749 Grease cap (1.986" OD)
- 5 X1023R Wheel nuts
- Use with a 7" x 1-1/4" brake
To determine the bolt circle on hubs or wheels with an odd number of bolt holes, measure from outside to center of the studs across the pattern(bolt patterns are always measured in inches). Example: If you were to number the studs 1, 2, 3, then you would measure from the outside of stud 1 to the center of stud 3.
